Industrial Automation

Login / Signup

Industrial Automation

DRT1-COM

Communications Unit

DRT1-COM

Connects to a Total Maximum of Eight Digital I/O, Analog I/O, and Relay Output Units Compatible with MULTIPLE I/O TERMINAL.

last update: September 24, 2012

General Specifications

I/O power supply voltage	20.4 to 26.4 VDC (24 VDC +10%/-15%)
Communications power supply voltage	11 to 25 VDC (supplied from the communications connector)
Internal power supply voltage	20.4 to 26.4 VDC (24 VDC +10%/-15%)
Current consumption	Communications: 30 mA max. Internal circuit: 0.6 A at 24 VDC (with max. I/O load)
Dielectric strength	500 VAC
Noise immunity	Conforms to IEC61000-4-4, 2 kV (Power line)
Vibration resistance	10 to 150 Hz, 1.0-mm double amplitude or 70 m/s²
Shock resistance	200 m/s²
Mounting strength	No damage when 100 N pull load was applied in all directions (10 N min. in the DIN track direction)
Terminal strength	No damage when 100 N pull load was applied
Screw tightening torque	0.3 to 0.5 Nm Phoenix connector: 0.25 to 0.3 Nm
Ambient operating temperature	-10°C to 55°C (with no icing or condensation)
Ambient operating humidity	25% to 85%
Ambient storage temperature	-25°C to 65°C (with no icing or condensation)
Accessories	End connector (one)

Specifications

Connectable Units		8
Unit I/O points		1,024 max. (including inputs and outputs)
Communications distance	Total extension	3 m max.
Communications distance	Between Units	1 m max. (40 mm max. with the standard cable provided with the Unit) *
Dielectric strength		500 VAC for 1 min.
Mounting method		DIN 35 mm-track mounting
Unit output power supply		0.4 A max. (see Note .)

* One cable is provided with each I/O Unit.
Note: The total current consumption for I/O Unit interfaces must not exceed 0.4 A.

last update: September 24, 2012

Product Category

Automation Systems
- Networks
  - DeviceNet
    - MULTIPLE I/O
      - DRT1-COM
      - GT1-ID / OD
      - GT1-AD / DA
      - GT1-TS04[]
      - GT1-ROS16 / ROP08 / FOP08

Top of page