Industrial Automation

X

General-purpose Basic Switch

Direct Current Switch with Built-in Magnetic Blowout

last update: September 24, 2012

Ratings


Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 10 10 3		3 3 3 3 1.5	1.5 1.5 1.5 1.5 0.75	10 10 10 7.5 2	10 10 10 6 1.5	5 5 5 5 2	2.5 2.5 2.5 2.5 1.5

Note: 1. The above values are for the steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above electrical ratings also apply to the AC voltage.
6. With the reverse-type models (X-10GM[]), the normally closed circuits and normally open circuits are reversed.
7. The ratings values apply under the following test conditions:
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency: 20 operations/min

Contact Specification

	Gap (standard value)	0.9 mm
Contacts	Material	Silver
	Gap (standard value)	0.9 mm
Inrush current	NC	30 A max.
Inrush current	NO	15 A max.

Characteristics


Operating speed		0.1 mm to 1 m/s *1
Operating frequency	Mechanical	240 operations/min
Operating frequency	Electrical	20 operations/min
Insulation resistance		100 M Ω min. (at 500 VDC)
Contact resistance		15 m Ω max. (initial value)
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min between terminals of the same polarity, between current-carrying metal parts and the ground, and between each terminal and non-current-carrying metal parts

Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *2
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max. 1 2
Durability	Mechanical	1,000,000 operations min.
Durability	Electrical	100,000 operations min.
Degree of protection		IP00
Degree of protection against electric shock		Class I
Proof tracking index (PTI)		175
Ambient operating temperature		− 25 ° C to 80 ° C (with no icing)
Ambient operating humidity		35% to 85%RH
Weight		Approx. 27 to 63 g

*1. The values are for the pin plunger models. (Contact your OMRON representative for other models.)
*2. Malfunction: 1 ms max.

last update: September 24, 2012

Product Category

Switches
- Basic Switches
  - Basic Switches (Z-Size)

Top of page