NX-series Communication Control Unit
last update: March 13, 2023
Unit type | Appearance | Supported
communications protocol |
Number of
communications connectors |
Network
variables |
Unit
version |
Model |
---|---|---|---|---|---|---|
Communication
Control Unit |
EtherNet/IP *1 | 3 | 2 *2 | Ver. 1.01 | NX-CSG320 |
Note: One NX-END02 End Cover is provided with the NX-CSG320 Communication Control Unit.
*1. Routing of the CIP Safety protocol is supported.
*2. PORT1 is an independent port. PORT2A and PORT2B are the ports with a built-in Ethernet switch.
End Cover (NX-END02): 1
One End Cover is provided with the Communication Control Unit.
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
Product
name |
Specifications | Model | ||
---|---|---|---|---|
Number of
licenses |
Media | |||
Sysmac
Studio Standard Edition Ver. 1.[][] |
The Sysmac Studio is the software that provides an
integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY- series Industrial PC, EtherCAT Slave, and the HMI. Sysmac Studio runs on the following OS. *2 Windows 7(32-bit/64-bit version)/8(32-bit/64-bit version)/ 8.1(32-bit/64-bit version)/10(32-bit/64-bit version)/ 11(64-bit version) For details, refer to your local OMRON website. The Sysmac Studio Standard Edition DVD includes Support Software to set up EtherNet/IP Units, DeviceNet slaves, Serial Communications Units, and Support Software for creating screens on HMIs (CX-Designer). For details, refer to your local OMRON website. |
---
(Media only) |
Sysmac
Studio (32bit) DVD |
SYSMAC-SE200D |
---
(Media only) |
Sysmac
Studio (64bit) DVD |
SYSMAC-SE200D-64 | ||
1 license *3 | --- | SYSMAC-SE201L | ||
Sysmac
Studio Safety Edition *4 Ver. 1.[][] |
Sysmac Studio Safety Edition is a license including
necessary setting functions for the safety control system. *This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it. |
1 license | --- | SYSMAC-FE001L |
Product name | Specification | Model |
---|---|---|
SD Memory Card | Flash Memory, 2 GB | HMC-SD292 |
Flash Memory, 4 GB | HMC-SD492 |
Note: Refer to the HMC-SD292/492/1A2 datasheet for details on the memory card.
Product Name | Specification | Model |
---|---|---|
Unit/Terminal Block Coding Pins | For 10 Units (Terminal Block: 30 pins, Unit: 30 pins) | NX-AUX02 |
Product name | Specification | Model | |||
---|---|---|---|---|---|
No. of
terminals |
Terminal number
indications |
Ground terminal
mark |
Terminal current
capacity |
||
Terminal Block | 8 | A/B | Provided | 10 A | NX-TBC082 |
last update: March 13, 2023