Page top

page-top

Omron uses cookies to improve your experience on this website. By continuing to use the website, you hereby agree to our Privacy and Cookie Policy

Safety Door Switch Selection Guide

Model

Appearance

Features

Approved Standard No.

Agency

D4NS

Safety-door Switch

D4NS Safety-door Switch

• Lineup includes three-contact models with 2NC/1NO and 3NC contact forms and MBB models in addition to the previous 1NC/1NO and 2NC contact forms.

• M12-connector models are available, saving on labor and simplifying replacement.

• Standardized gold-clad contacts provide high contact reliability. Can be used with both standard loads and microloads.

• Variety of metal heads available.

EN60947-5-1

GS-ET-15

UL508

CSA C22.2

No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

• KOSHA*

D4GS-N

Slim Safety-door Switch

D4GS-N Slim Safety-door Switch

• Slim design with a width of only 17mm. (three-terminal contact)

• Reversible design allowing either front or rear mounting.

• Built-in switches with two- or three terminal contact construction are available.

• Degree of protection: IP67

EN60947-5-1

GS-ET-15

UL508

CSA C22.2

No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

D4BS

Safety-door Switch

D4BS Safety-door Switch

• Direct opening mechanism pulls the contacts apart from each other if any abnormality, such as contact welding, should occur in the contact area.

• Wide operating temperature range from -40° to 80°C

• Degree of protection of the switch box: IP67 (EN60947-5-1).

EN60947-5-1

GS-ET-15

UL508

CSA C22.2

No.14

GB14048.5

• TÜV, Rheinland

• BIA

• SUVA

• UL

• CSA

• CQC

D4GL

Guard Lock Safety-door Switch

D4GL Guard Lock Safety-door Switch

• Slim safety-door switch with an electromagnetic lock and unlock mechanism.

• Built-in switches with four- or five-terminal contact construction are available.

• Capable of holding force of 1,000 N min. (224 lbf)

• Can be used with either standard loads or microloads.

• Line-up includes models with a conduit size of M20.

EN60947-5-1

GS-ET-19

UL508

CSA C22.2

No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

• KOSHA*

D4JL

Guard Lock Safety-door Switch

D4JL Guard Lock Safety-door Switch

• World's Top* Holding Force of 3,000 N min. *For plastic models.

• Two safety circuits and two monitor contacts provide an array of monitoring patterns.

• Models with trapped keys/rear release button prevent workers from being locked in hazardous work areas.

• Degree of protection: IP67.

EN60947-5-1
GS-ET-19
UL508
CSA C22.2
No.14
GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

• KOSHA*

D4NL

Guard Lock Safety-door Switch

D4NL Guard Lock Safety-door Switch

• Built-in switches with four- or five-terminal contact construction are available.

• Capable of holding force of 1,300 N min. (292.25 lbf)

• Can be used with either standard loads or microloads.

• Line-up includes models with a conduit size of M20.

• Degree of protection: IP67.

EN60947-5-1

GS-ET-19

UL508

CSA C22.2

No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

• KOSHA*

D4BL

Guard Lock Safety-door Switch

D4BL Guard Lock Safety-door Switch

• Doors are locked mechanically when an Operation Key is inserted.

• Mechanical lock is released when voltages are applied to the solenoid.

• Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.

• Degree of protection: IP67.

EN60947-5-1

GS-ET-19

UL508

CSA C22.2

No.14

GB14048.5

• TÜV, Rheinland

• UL

• CSA

• CQC

D4NH

Safety-door Hinge Switch

D4NH Miniature Safety-door Hinge Switch

• Lineup includes three-contact models with 2NC/1NO and 3NC contact forms and MBB models in addition to the previous 1NC/1NO and 2NC contact forms.

• M12-connector models are available, saving on labor and simplifying replacement.

• Standardized gold-clad contacts provide high contact reliability. Can be used with both standard loads and microloads.

EN60947-5-1

GS-ET-15

UL508

CSA C22.2

No.14

GB14048.5

Application Standard No:

EN81 (Lifts)

EN115 (Escalators, Conveyors)

• TÜV SÜD

• UL

• UL (cUL)

• CQC

D40A/G9SX-NS

Compact Non-contact Door Switch/Flexible Safety Unit

D40A / G9SX-NS Compact Non-contact Door Switch / Flexible Safety Unit

• Stable operation reduces Controller errors caused by unstable doors.

• Connect up to 30 Non-contact Door Switches with LED indicators to one Controller.

• Reversible switch provides flexibility in installation.

• Two-color LED indicator enables easier maintenance by identification of door status and cable disconnections.

• Both Non-contact Door Switches and conventional Key-type Safety-door Switches can be input to one Controller, saving space.

• Category 3/PLd

EN50178
IEC/EN60204-1
ISO13849-1
IEC/EN61508
IEC/EN60947-5-3
IEC/EN61000-6-2
IEC/EN61000-6-4
PDF-M
UL508
CAN/CSA C22.2
No.14

• TÜV SÜD

• UL (cUL)

• KOSHA

D40Z

Compact Non-contact Door Switch

D40Z Compact Non-contact Door Switch

• A Non-contact Door Switch that complies with ISO 13849-1 Safety Category 4/PLe.

• Confirm the current status at the Switch.

• Connect up to 30 Switches in series to one controller and maintain Safety Category 4/PLe.

EN50178
IEC/EN60204-1
ISO13849-1
IEC/EN61508
IEC/EN60947-5-3
EN55011
IEC/EN61000-6-4
EN1088
UL508
CAN/CSA C22.2
No.14

• TÜV SÜD

• UL (cUL)

D4GL-SK10

D4GL-mounting Slide Keys

D4SL-SK10/D4GL-SK10 Door-mounting Slide Keys

• The lockout key prevents operators from becoming trapped inside hazardous areas.

• The vertical D4GL Guard Lock Safety-door Switch can be easily mounted on 40 × 40 mm aluminum frames.

• The plastic material makes the Slide Key suitable for lightweight doors.

-

-

D4NS-SK/ D4JL-SK

D4NS/D4JL-mounting Slide Keys

D4NS-SK / D4JL-SK D4NS/D4JL-mounting Slide Keys

• Safety-door Switch attachments fit doors on aluminum frames as small as 20 x 20 mm and frames that are large enough to enclose robotics.

• Shortens the design time for the door switch attachment.

-

-

 

Note. For S-mark certified models, refer to the "List of S-mark Certified Models".