Page top

page-top

Omron uses cookies to improve your experience on this website. By continuing to use the website, you hereby agree to our Privacy and Cookie Policy

Emergency Stop Switch Selection Guide

Model

Appearance

Features

Approved Standard No.

Agency

A165E

Emergency Stop Switch

A165E Emergency Stop Switch

• Direct opening mechanism to open contacts in emergencies, such as when they are welded.

• Includes a safety lock to prevent misuse.

• Features separate construction that allows the Switch to be separated for easier wiring and one-piece-like construction that allows easier handling.

• Models available with 3 contacts built into a single block (A165E-U).

EN60947-5-1

EN60947-5-5
UL508
CSA C22.2
No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

A22E

Emergency Stop Switch

A22E Emergency Stop Switch

• Direct opening mechanism to open contacts in emergencies, such as when they are welded.

• Includes a safety lock to prevent misuse.

• Easy mounting and removal of Switch Blocks using a lever.

• Mount three Switch Units in series to improve wiring efficiency (with non-lighted Switch Units, three Units can be mounted for multiple contacts).

• Install using either round, or forked crimp terminals.

• Equipped with lock plate as a standard feature so that the Operation Unit and Switch do not become easily separated.

EN60947-5-1

EN60947-5-5
UL508
CSA C22.2
No.14

GB14048.5

• TÜV SÜD

• UL

• UL (cUL)

• CQC

• KOSHA *

 

Note:

1. The safety category refers to the highest applicable category that can be selected when a safety block is created for a control system. It is not the safety category applicable to the safety component itself.


2. For S-mark certified models, refer to the "List of S-mark Certified Models".

 

* Some of the A22E models are S-mark certified.