Page top

page-top

Omron uses cookies to improve your experience on this website. By continuing to use the website, you hereby agree to our Privacy and Cookie Policy

Temperature Controller Selection Guide

E5Z Series Digital Controllers:

 

 Item               Model

E5CZ

E5EZ

E5AZ

E5EZ-PRR

Appearance

E5CZ

E5EZ

E5AZ

E5EZ-PPR

No. of loops

1

Size

48 × 48 mm (front mount)

48 × 96 mm (front mount)

96 × 96 mm (front mount)

48 × 96 mm (front mount)

Input accuracy

±0.5%

Input type

Thermocouple K, J, L, T, E, U, N, R, S or B; RTD Pt-100, JPt-100; Infrared temperature sensor;

Voltage input: 0 to 50 mV

Input impedance

Current input: 150 Ω, Voltage input: 1 MΩ

Sampling rate

250 ms

Power supply

Universal AC Power (100 to 240 VAC, 50/60 Hz), 24 VAC, 50/60 Hz or 24 VDC

Universal AC Power (100 to 240 VAC, 50/60 Hz)

Operating power

85% to 110% of rated supply voltage

Power consumption

100 to 240 VAC: 7.5 VA max.
24 VAC: 5.5 VA max.
24 VDC: 3.5 W max.

100 to 240 VAC: 8.5 VA max.
24 VAC: 6 VA max.
24 VDC: 4 W max.

10 VA (10W)

Control type

ON/OFF or 2 PID control (with auto-tuning)

2 PID control (with autotuning)

Control mode

Heating/cooling control

Position proportional control only

Control output

Relay output: SPST; SSR driver (voltage); Current output

Relay output: 2 nos of relays (SPST), for open and close function

Auxiliary output

Not supported

Event output

2 max.

Logic operation

Not supported

Transfer output

Not supported

Remote setpoint

Not supported

Potentiometer

Not supported

100 to 2500 Ω

Heater / SSR failure detection

Heater detection (1 CT only)

Not supported

Setting method

Digital setting using front panel key or software access

Indication method

11-segment 2-line digital and individual indicator

7-segment 3-line digital and single lighting indicator

Setpoint program

Not supported

Bank switching

Not supported

Communication type

RS-485 communication type, supporting Compoway/F or Modbus

RS-232 or RS-485 communication type, supporting Compoway/F or Modbus

Alarm

2 alarms

3 alarms

2 alarms

Configuration software

USB-Serial conversion cable with Thermo Mini software

 

 

E5N Series Digital Controllers:

 

 Item             Model

E5GN

E5CN

E5EN

E5AN

Appearance

E5GN

E5CN

E5EN

E5AN

No. of loops

1

Size

48 × 24 mm (panel mount)

48 × 48 mm (front mount)

48 × 96 mm (front mount)

96 × 96 mm (front mount)

Input accuracy

Thermocouple: ±0.3%; Pt/analog: ±0.2%

Input type

Thermocouple K, J, L, T, E, U, N, R, S or B; RTD Pt-100, JPt-100;
Infrared temperature sensor; Voltage input: 0 to 50 mV

Input impedance

Current input: 150 Ω, Voltage input: 1 MΩ

Sampling rate

250 ms

Power supply

Universal AC Power (100 to 240 VAC, 50/60 Hz), 24 VAC, 50/60 Hz or 24 VDC

Operating power

85% to 110% of rated supply voltage

Power consumption

100 to 240 VAC: 5.5 VA max.
24 VAC: 3 VA max.
24 VDC: 2 W max.

100 to 240 VAC: 7.5 VA max.
24 VAC: 5 VA max.

24 VDC: 3 W max.

100 to 240 VAC: 10 VA max.
24 VAC: 5.5 VA max.

24 VDC: 4 W max.

Control type

ON/OFF or 2 PID control (with auto-tuning)

Control mode

Standard or heating/cooling control

Control output

Relay output: SPST; SSR driver (voltage); Current output

Auxiliary output

2 max. 3 max.

Event output

2 max.

Logic operation

8 operations

Transfer output

Supported on control OUT1

Remote setpoint

Not supported

Potentiometer

Not supported

Heater / SSR failure detection

1 CT input for heater and SSR failure detection

2 CT inputs for heater and SSR failure detection

Setting method

Digital setting using front panel key or software access

Indication method

11-segment 1-line digital and single lighting indicator

11-segment 2-line digital and individual indicator 11-segment 3-line digital and individual indicator

Setpoint program

Not supported

Bank switching

Not supported

Communication type

RS-232 or RS-485 communication type, supporting Compoway/F or Modbus

Alarm

2 alarms

Configuration software

USB-Serial conversion cable with CX-Thermo software

 

E5N Series Advanced Digital Controllers:

 

 Item               Model

E5CN-H

E5EN-H

E5AN-H

Appearance

E5CN-H

E5EN-H

E5AN-H

No. of loops

1

Size

48 × 48 mm (front mount)

48 × 96 mm (front mount)

96 × 96 mm (front mount)

Input accuracy

±0.1%

Input type

Fully universal inputs can be selected from Thermocouple, RTD, VDC, or mA

Input impedance

Current input: 150 Ω, Voltage input: 1 MΩ

Sampling rate

60 ms

Power supply

Universal AC Power (100 to 240 VAC, 50/60 Hz), 24 VAC, 50/60 Hz or 24 VDC

Operating power

85% to 110% of rated supply voltage

Power consumption

100 to 240 VAC: 8.5 VA max.
24 VAC: 5.5 VA max.
24 VDC: 3.5 W max.

100 to 240 VAC: 12 VA max.
24 VAC: 8.5 VA max.
24 VDC: 5.5 W max.

Control type

ON/OFF or 2 PID control (with auto-tuning)

Control mode

Standard or heating/cooling control

Standard, heating/cooling or position proportional control

Control output

Relay output: SPST; SSR driver (voltage); Current output

Auxiliary output

2 max.

3 max.

Event output

2 max.

4 max.

Logic operation

8 operations

Transfer output

Supported

Remote setpoint

Not supported

Supported

Potentiometer

Not supported

Supported

Heater / SSR failure detection

2 CT inputs for heater and SSR failure detection

Setting method

Digital setting using front panel key or software access

Indication  method

11-segment 2-line digital and individual indicator, with 5-digit display

11-segment 3-line digital and individual indicator, with 5-digit display

Setpoint program

1 × 8 segment (bank switching)

Bank switching

8 banks

Communication type

RS-232 or RS-485 communication type, supporting Compoway/F, Sysway or Modbus

Alarm

2 alarms

3 alarms

Configuration software

USB-Serial conversion cable with CX-Thermo software

 

 

E5R Series High-performance Controllers:

 

 Item             Model

E5ER

E5AR

E5ER-T

E5AR-T

Appearance

E5EN

E5AN

E5EN

E5AN

No. of loops

2

4

2

4

Size

48 × 96 mm (front mount)

96 × 96 mm (front mount)

48 × 96 mm (front mount)

96 × 96 mm (front mount)

Input accuracy

±0.1%

Input type

Thermocouple K, J, L, T, E, U, N, R, S or B; RTD Pt-100;
Current Input: 4 to 20 mA DC, 0 to 20 mA DC; Voltage input: 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC

Input impedance

Current input: 150 Ω, Voltage input: 1 MΩ

Sampling rate

50 ms

Power supply

Universal AC Power (100 to 240 VAC, 50/60 Hz), 24 VAC, 50/60 Hz or 24 VDC

Operating power

85% to 110% of rated supply voltage

Power consumption

100 to 240 VAC: 17 VA
24 VAC/VDC: 11 VA/7 W

100 to 240 VAC: 22 VA
24 VAC/VDC: 15 VA/10 W

100 to 240 VAC: 17 VA
24 VAC/VDC: 11 VA/7 W

100 to 240 VAC: 22 VA
24 VAC/VDC: 15 VA/10 W

Control type

2 PID control (with auto-tuning)

Control mode

Standard, heating/cooling or position-proportional control

Control output

Relay output: SPST; SSR driver (voltage); Current output

Auxiliary output

4 max.

Event output

6 max.

Logic operation

Math functions

Transfer output

Supported

Remote setpoint

Supported

Potentiometer

Supported

Heater / SSR failure detection

Not supported

Setting method

Digital setting using front panel key or software access

Indication method

7-segment 3-line digital and single lighting indicator

Setpoint program

1 × 8 segments (bank switching)

32 programs × 256 segments

Bank switching

8 banks

Communication type

RS-485 communication type, supporting Compoway/F, Modbus and DeviceNet

Alarm

No boundary

Configuration software

CX-Thermo through RS-485 terminal

 

Multi-loop Modular Controllers:

 

 Item         Model

EJ1

E5ZN

E5ZN-DRT

Appearance

EJ1

E5ZN

E5ZN-DRT

No. of loops

4/module

2/module

DeviceNet module

Size

HFU: 31 × 95.4 mm;

End Unit: 15.7 × 95.4 mm (In-Panel DIN Rail)

Each module: 130 × 30 mm (In-Panel DIN Rail)

---

Input accuracy

±0.5%

---

Input type

Fully universal inputs can be selected from Thermocouple, RTD, VDC or mA

Thermocouple K, J, L, T, E, U, N, R, S or B; RTD Pt-100, JPt-100;
Infrared temperature sensor; Voltage input: 0 to 50 mV

Input impedance

Current input: 150 Ω, Voltage input: 1 MΩ

---

Sampling rate

250 ms

500 ms ---

Power supply

24 VDC

Operating power

85% to 110% of rated supply voltage

Power consumption

5 W

3 W

Control type

ON/OFF or 2 PID control

---

Control mode

Standard or heating/cooling control

---

Control output

SSR driver, Transistor, Current output

---

Auxiliary output

Supported

---

Event output

Supported

---

Logic operation

Supported

Not supported

---

Transfer output

Supported

---

Remote setpoint

Not supported

---

Potentiometer

Not supported

---

Heater / SSR failure detection

Not supported

Heater burnout alarm ---

Setting method

Setting through software

By setting display unit ---

Indication  method

Not supported

---

Setpoint program

Not supported

---

Bank switching

8 banks

Not supported

---

Communication type

RS-422, RS-485, RS-232, Devicenet, supporting Compoway/F or Modbus

RS-485 communication type,
supporting Modbus

DeviceNet

Alarm

No boundary

---

Configuration software

USB-Serial Conversion cable with
CX-Thermo software

---

 

Other Controllers:

 

 Item               Model

E5C2

E5CS / E5CSV

Appearance

E5C2

E5CS

No. of loops

1

Size

48 × 48 mm (front mount)

Input accuracy

±2%

±0.5%

Input type

Thermocouple J or K, RTD Pt-100 and Thermistor THE

Thermocouple K, J, L, T, U, N or R, RTD Pt-100, JPt-
100, Thermistor: E52-THE

Input impedance

---

Sampling rate

---

500 ms

Power supply

100/110/120 VAC or 200/220/240 VAC

Universal AC Power (100 to 240 VAC, 50/60 Hz)

24 VAC/VDC

Operating power

90% to 110% of rated supply voltage

85% to 110% of rated supply voltage

Power consumption

Approx. 2 VA

100 to 240 VAC: 5 VA

24 VAC/VDC: 3 VA/2 W

Control type

ON/OFF or position-proportional control

ON/OFF or 2 PID control (with automatic PID setting)

Control mode

Standard

Control output

Relay output: SPST

Relay output: SPST; SSR driver (voltage)

Auxiliary output

Not supported

Event output

Not supported

Logic operation

Not supported

Transfer output

Not supported

Remote setpoint

Not supported

Potentiometer

Not supported

Heater / SSR failure detection

Not supported

Setting method

Analog setting

Digital setting using front panel key and DIP switch setting

Indication method

No indication

7-segment single-line digital and deviation indicator

Setpoint program

Not supported

Bank switching

Not supported

Communication type

Not supported

Alarm

Not supported

2 alarms

Configuration software

Not supported