Page top

Industrial Automation

Contact

Industrial Automation

E5GN

Basic-type Digital Temperature Controller (48 x 24 mm)

E5GN

New 48 x 24-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function.

Related Contents

last update: October 17, 2012

Controllers with Screw Terminal Blocks

Models with Temperature Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RT
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1T
2 --- --- E5GN-R1BT
--- RS-232C --- --- E5GN-R101T-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103T-FLK
2 --- --- --- E5GN-R2T
Detection for
single-phase
heaters		 --- --- E5GN-R2HT
--- 2 --- --- E5GN-R2BT
--- RS-485 --- --- E5GN-R203T-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QT
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1T
2 --- --- E5GN-Q1BT
--- RS-232C --- --- E5GN-Q101T-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103T-FLK
2 --- --- --- E5GN-Q2T
Detection for
single-phase
heaters		 --- --- E5GN-Q2HT
--- 2 --- --- E5GN-Q2BT
--- RS-485 --- --- E5GN-Q203T-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1T
2 --- --- E5GN-C1BT
--- RS-232C --- --- E5GN-C101T-FLK
RS-485 --- --- E5GN-C103T-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RTD
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1TD
2 --- --- E5GN-R1BTD
--- RS-232C --- --- E5GN-R101TD-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103TD-FLK
2 --- --- --- E5GN-R2TD
Detection for
single-phase
heaters		 --- --- E5GN-R2HTD
--- 2 --- --- E5GN-R2BTD
--- RS-485 --- --- E5GN-R203TD-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QTD
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1TD
2 --- --- E5GN-Q1BTD
--- RS-232C --- --- E5GN-Q101TD-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103TD-FLK
2 --- --- --- E5GN-Q2TD
Detection for
single-phase
heaters		 --- --- E5GN-Q2HTD
--- 2 --- --- E5GN-Q2BTD
--- RS-485 --- --- E5GN-Q203TD-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1TD
2 --- --- E5GN-C1BTD
--- RS-232C --- --- E5GN-C101TD-FLK
RS-485 --- --- E5GN-C103TD-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with Analog Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard
or
heating/
cooling		 1 --- --- --- RS-485 --- --- E5GN-R103L-FLK
Voltage
output
(for
driving
SSR)		 --- --- E5GN-Q103L-FLK
Current
output		 Transfer
output
using
control
output		 --- --- --- E5GN-C1L

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard
or
heating/
cooling		 1 --- --- --- RS-485 --- --- E5GN-R103LD-FLK
Voltage
output
(for
driving
SSR)		 --- --- E5GN-Q103LD-FLK
Current
output		 Transfer
output
using
control
output		 --- --- --- E5GN-C1LD

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Controllers with Screwless Clamp Terminal Blocks

Models with Temperature Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RT-C
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1T-C
2 --- --- E5GN-R1BT-C
--- RS-232C --- --- E5GN-R101T-C-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103T-C-FLK
2 --- --- --- E5GN-R2T-C
Detection for
single-phase
heaters		 --- --- E5GN-R2HT-C
--- 2 --- --- E5GN-R2BT-C
--- RS-485 --- --- E5GN-R203T-C-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QT-C
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1T-C
2 --- --- E5GN-Q1BT-C
--- RS-232C --- --- E5GN-Q101T-C-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103T-C-FLK
2 --- --- --- E5GN-Q2T-C
Detection for
single-phase
heaters		 --- --- E5GN-Q2HT-C
--- 2 --- --- E5GN-Q2BT-C
--- RS-485 --- --- E5GN-Q203T-C-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- Transfer
output
using
control
output		 --- --- --- E5GN-C1T-C
2 --- --- E5GN-C1BT-C
--- RS-232C --- --- E5GN-C101T-C-FLK
RS-485 --- --- E5GN-C103T-C-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RTD-C
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1TD-C
2 --- --- E5GN-R1BTD-C
--- RS-232C --- --- E5GN-R101TD-C-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103TD-C-FLK
2 --- --- --- E5GN-R2TD-C
Detection for
single-phase
heaters		 --- --- E5GN-R2HTD-C
--- 2 --- --- E5GN-R2BTD-C
--- RS-485 --- --- E5GN-R203TD-C-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QTD-C
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1TD-C
2 --- --- E5GN-Q1BTD-C
--- RS-232C --- --- E5GN-Q101TD-C-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103TD-C-FLK
2 --- --- --- E5GN-Q2TD-C
Detection for
single-phase
heaters		 --- --- E5GN-Q2HTD-C
--- 2 --- --- E5GN-Q2BTD-C
--- RS-485 --- --- E5GN-Q203TD-C-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1TD-C
2 --- --- E5GN-C1BTD-C
--- RS-232C --- --- E5GN-C101TD-C-FLK
RS-485 --- --- E5GN-C103TD-C-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with Analog Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1L-C

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1LD-C

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Accessories (Order Separately)

USB-Serial Conversion Cable

Model
E58-CIFQ1

Waterproof Packing

Model
Y92S-32

Current Transformers (CTs)

Hole diameter Model
5.8 dia. E54-CT1
12.0 dia. E54-CT3

CX-Thermo Support Software

Model
EST2-2C-MV4

Note: The E5GN is supported by CX-Thermo version 4.2 and higher.

last update: October 17, 2012

Product Category

Products

About Us

Solutions

Privacy

Services

Resources

Omron Automation is an industrial automation partner that creates, sells and services fully integrated automation solutions that include sensing, control, safety, vision, motion, robotics and more.

Follow Us

Youtube Facebook Linkedin
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.