Menu
Industrial Automation
ZN-A
Air Clean Units
The ZN series is even thinner and sports improved air volume. These products enable cleaning that is both fast and flexible.
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: June 17, 2013
Air Clean Units
| Model | ZN-A2502D | ZN-A4105D | ZN-A6112 | ZN-A6112P |
|---|---|---|---|---|
| Air outlet dimension | 225 × 205 mm | 360 × 360 mm | 578 × 568 mm | |
| Main filter/
Removal rate |
HEPA filter/ 99.99% of particles 0.3- μm and larger | |||
| Air volume (m3/min) | 0.3 to 1.8 m3/min
(typical) |
1.0 to 5.0 m3/min
(typical) |
4 to 12 m3/min (typical) | |
| Power supply
voltage |
24 VDC ± 10%, Ripple (p-p): 10% max. | |||
| Current
consumption |
Airflow level 5:
2.1 A max. (RMS value) (Peak: 3 A) |
Airflow level 5:
3.5 A max. (RMS value) (Peak: 5.5 A) |
Airflow level 5:
24 VDC: 4.3 A max. (RMS value) (Peak: 8 A) |
|
| Airflow levels | 5 levels
Settable by button operation Settable by serial (RS-422 or RS-485 *1) communications |
5 levels
Settable by button operation Settable by serial (RS-422 or RS-485 *1) communications Settable by ON/OFF signal input (3 levels) *2 |
||
| Running noise | Airflow level 3: 53 dB (typical) | Airflow level 3: 53 dB (typical) | ||
| Fan motor | Compact DC brushless
centrifugal blower x 2 |
DC brushless turbo
fan x 1 |
DC brushless turbo fan x 1 | |
| Indicators | Operating status: Green/Red
Air volume: Blue |
|||
| Filter clogging
detection |
Yes | No | Yes | |
| External output | Alarm output 1:
Alarm output 1 turns OFF when one of the following events occurs. (Normally alarm output 1 is ON.) (Check indicator to find out which event occurred.) Filter is clogged. Fan error Cleaning alarm for discharge needle (when ZN- J-series Ionizer (sold separately) is connected) Discharge error (when ZN-J-series Ionizer (sold separately) is connected) Alarm output 2: Enabled only when ZN-J-series Ionizer (sold separately) is connected. Alarm output 2 turns OFF to indicate that cleaning is necessary for ZN-J Series discharge needles. (Normally alarm output 2 is ON.) |
Fan operation alarm output
Alarm output OFF in below cases (ON during normal operation) Fan not rotating (Including when power is OFF or on standby) Trouble Clogged filter (ZN-A6112P only) |
||
| 30 VDC, 50 mA max.
Residual voltage: 1 V max. with load current of 10 mA, 2 V max. with load current of 50 mA. |
||||
| Applicable Ionizer
Unit (Optional) |
ZN-J25A | ZN-J41A | None | |
| Ambient
temperature range |
Operating and storage: 0 to 40 °C (with no icing or condensation) | |||
| Ambient humidity
range |
Operating and storage: 35% to 85% (with no condensation) | |||
| Applicable
contamination degree |
Pollution degree 2 | |||
| Material | Top: Antistatic plastic, bottom: SECC | Top: ABS resin, HEPA filter frame: aluminum | ||
| Dimensions (mm) | 250 × 250 × 97.5
mm (W × D × H) |
410 × 410 × 129.5
mm (W × D × H) |
714.4 × 654.4 × 174.3 mm (W × D × H)
(Height from attachment surface: 117.3) |
|
| Weight (Packaged) | Approx. 2 kg
(Approx. 3.3 kg) |
Approx. 5.2 kg
(Approx. 8.6 kg) |
Approx. 12.5 kg (Approx. 17 kg) | |
| Accessories | Instruction Sheet, Sealing parts,
Mounting screws, I/O connector (XW4B-06B1-H1) |
Instruction Sheet, Sealing parts,
Mounting screws, I/O connector (XW4B-10B1-H1) |
||
*1. Use the dip switches on the unit surface (connector surface) to switch between RS-422 and RS-485.
*2. Contact input: 5 mA max. ON current. Use input device of 30 V or higher withstand voltage.
Ionizer
| Model | ZN-J25A | ZN-J41A |
|---|---|---|
| Applicable Air Clean Units | ZN-A2502D | ZN-4105D |
| Power supply voltage | 24 VDC ± 10%, Ripple (p-p): 10% max. | |
| Current consumption | 300 mA max | |
| Discharge voltage | ± 7 kV max | |
| Discharge method | Variable DC discharge | |
| Static electricity removal
time (typical) *1 |
5 s max. | |
| Ion balance (typical) *2 | ± 30 V max. | |
| Indicators | Power (green), Cleaning notice (orange flashing), Cleaning alarm (orange), High voltage
error (red) |
|
| External output | High voltage error, cleaning outputs: Output from photo MOS relay (30V DC, 300 mA
max.) |
|
| Functions | Manual adjustment of ion balance, cleaning required detection, high voltage detection | |
| Ambient temperature range | Operating and storage: 0 to 40 °C (with no icing or condensation) | |
| Ambient humidity range | Operating and storage: 35% to 65% (with no condensation) | |
| Materials | Unit: ABS, Discharge needles: Tungsten | |
| Dimensions (mm) | 248 × 310 × 45 mm (W × D × H) | 408 × 470 × 45 mm (W × D × H) |
| Weight (Packaged) | Approx. 0.6 kg (Approx. 1.4 kg) | Approx. 1.5 kg (Approx. 2.7 kg) |
| Accessories | Instruction Sheet
Sealing parts Mounting screws Connector cable for Air Clean Unit English warning label |
|
*1. Measurement conditions:
Distance: 300 mm
Air Clean Unit: ZN-A Series with airflow level 5 at center of air outlet
Discharging from ±1000 V to ±100 V with a Charge Plate Monitor (150 × 150 mm, 20 pF)
Temperature: 18 to 28°C, Humidity: 35% to 55%
Performance may not be satisfied if gases such as from solvents are in the measurement area.
*2. Measurement conditions:
Distance: 300 mm
Air Clean Unit: ZN-A Series with airflow level 5 at center of air outlet
Measured for 10 sec by a charge plate monitor (150 × 150mm, 20pF)
Temperature: 18 to 28°C, Humidity: 35% to 55%
Performance may not be satisfied if gases such as from solvents are in the measurement area.
Distance: 300 mm
Air Clean Unit: ZN-A Series with airflow level 5 at center of air outlet
Discharging from ±1000 V to ±100 V with a Charge Plate Monitor (150 × 150 mm, 20 pF)
Temperature: 18 to 28°C, Humidity: 35% to 55%
Performance may not be satisfied if gases such as from solvents are in the measurement area.
*2. Measurement conditions:
Distance: 300 mm
Air Clean Unit: ZN-A Series with airflow level 5 at center of air outlet
Measured for 10 sec by a charge plate monitor (150 × 150mm, 20pF)
Temperature: 18 to 28°C, Humidity: 35% to 55%
Performance may not be satisfied if gases such as from solvents are in the measurement area.
last update: June 17, 2013
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.