Safety Laser Scanner
last update: March 1, 2018
Appearance | Description | Max. Operating
Range (Safety Zone) |
Model | Remarks |
---|---|---|---|---|
![]() |
OS32C with back
location cable entry |
3m | OS32C-BP VER2 | CD-ROM (Configuration tool)
OS supported: Windows XP (32-bit version, Service Pack 3 or later) Windows 7 (32-bit version/ 64-bit version), Windows 8.1 (32-bit version/ 64-bit version), Windows 10 (32-bit version/ 64-bit version) For configuration tool version, refer to Catalog. |
4m | OS32C-BP-4M | |||
![]() |
OS32C with side
location cable entry * |
3m | OS32C-SP1 VER2 | |
4m | OS32C-SP1-4M | |||
![]() |
OS32C with
EtherNet/IP and back location cable entry |
3m | OS32C-BP-DM | |
4m | OS32C-BP-DM-4M | |||
![]() |
OS32C with
EtherNet/IP and side location cable entry * |
3m | OS32C-SP1-DM | |
4m | OS32C-SP1-DM-4M |
* For OS32C-SP1(-DM), each connector is located on the left as viewed from the back of the I/O block.
Appearance | Description | Model | Remarks |
---|---|---|---|
![]() |
Cable length: 3 m | OS32C-CBL-03M | One cable is required per sensor. |
Cable length: 10 m | OS32C-CBL-10M | ||
Cable length: 20 m | OS32C-CBL-20M | ||
Cable length: 30 m | OS32C-CBL-30M |
Appearance | Description | Model | Remarks |
---|---|---|---|
![]() |
Cable length: 2 m | OS32C-ECBL-02M | Required for configuration and monitoring. |
Cable length: 5 m | OS32C-ECBL-05M | ||
Cable length: 15 m | OS32C-ECBL-15M |
Note: An ethernet cable with an M12, 4-pin connector is required.
Appearance | Description | Model | Remarks |
---|---|---|---|
![]() |
Bottom/side mounting
bracket |
OS32C-BKT1 | Bottom/side mounting bracket x 1,
unit mounting screws x 4 sets |
![]() |
XY axis rotation mounting
bracket |
OS32C-BKT2 | XY axis rotation mounting bracket x 1,
unit mounting screws x 6 sets, bracket mounting screws x 1 set (must be used with OS32C-BKT1) |
![]() |
Simple mounting bracket | OS32C-BKT3 | Simple mounting brackets x 2,
unit mounting screws x 4 sets * |
![]() |
Protective cover for window | OS32C-BKT4 | |
![]() |
Mounting stand | OS32C-MT | When using a mounting stand, use an OS32C with
side location cable entry (OS32C-SP1(-DM)). The OS32C with back location cable entry (OS32C-BP(-DM)) cannot be mounted. Use with mounting brackets (OS32C-BKT1 and OS32C-BKT2). |
![]() |
Hardware kit for mounting
stand |
OS32C-HDT | Mounting screws x 3 sets
Use this when mounting a bracket to the mounting stand. |
* There are eight OS32C mounting screws: four screws for singular use, and four screws for protective cover for window.
Appearance | Description | Model | Remarks | |
---|---|---|---|---|
![]() |
Scan window | OS32C-WIN-KT | Spare for replacement | |
![]() |
Sensor block without I/O block
Max. Operating Range: 3 m |
OS32C-SN * | Spare for replacement | |
Sensor block without I/O block
Max. Operating Range: 4 m |
OS32C-SN-4M | |||
![]() |
Sensor block without I/O block for EtherNet/IP
Max. Operating Range: 3 m |
OS32C-SN-DM | Spare replacement for
EtherNet/IP |
|
Sensor block without I/O block for EtherNet/IP
Max. Operating Range: 4 m |
OS32C-SN-DM-4M | |||
![]() |
I/O block | With cable access from the back | OS32C-CBBP | Spare for replacement |
![]() |
With cable access from the left side | OS32C-CBSP1 | Spare for replacement |
* When ordering, add “VER2” to the end of the model number. (OS32C-SN VER2)
last update: March 1, 2018