Menu
Industrial Automation
FLV Series
Light Units
Ring Light, Bar Light and Spot Light. Light Series Approx. 200 Models.
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: January 27, 2025
Camera-mount Lighting Controller for FLV Series
FLV-TCC Series
| Model | FLV-TCC4 | FLV-TCC1 | |||
|---|---|---|---|---|---|
| Number of channels | 4 standard lights | 1 standard light | |||
| Applicable light *1 | FLV series (excluding FLV-EP series and FLV-LN series) | ||||
| Applicable camera *2 | FH-S series, FZ-S series | ||||
| Applicable vision system controller | FH series | ||||
| Input voltage | Supplied from applicable camera (12 V) or external power supply
(24 V) *3 |
||||
| External power supply voltage | 24 VDC 10% (including ripple) | ||||
| Current consumption | 1.5A max. | ||||
| Recommended
power supply |
S8VS-06024 (manufactured by OMRON, 24 VDC, 2.5 A, 60 W) | ||||
| Power of
connected light |
12 VDC
for camera supply |
Continuous lighting | 4ch total 7.5 W max. | 7.5 W max. | |
| Trigger
lighting |
Simultaneous
lighting |
4ch total 7.5 W max. | 7.5 W max. | ||
| Individual
lighting |
7.5 W max. for 1ch | ||||
| 24 VDC
for external supply |
Continuous lighting | 4ch total 7.5 W max. | 7.5 W max. | ||
| Trigger
lighting |
Simultaneous
lighting |
4ch total 15 W max. | 15 W max. | ||
| Individual
lighting |
15 W max. for 1ch | ||||
| Drive method | Constant voltage method | ||||
| Lighting method | Trigger lighting, Continuous lighting | ||||
| Luminance control method | Duty light adjustment or voltage light adjustment
Duty light adjustment: PWM frequency of 100 kHz, light adjustment of 255 levels Voltage light adjustment: Light adjustment of 255 levels (all are configured with vision system controller) |
||||
| Trigger lighting | Lighting in synchronization with trigger input timing from the
controller. |
||||
| Trigger lighting delay time | Ton: 30μs max. | ||||
| Lighting duration setting | Auto setting in accordance with shutter speed. | ||||
| External interface | Camera connection cable (directly connected with the main unit) | ||||
| Insulation resistance | 0.5 MΩ (100VDC) | ||||
| Ambient temperature | Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or
condensation) |
||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | ||||
| Degree of protection | IP20 (IEC60529) | ||||
| Vibration resistance (destructive) | 10 to 150 Hz, (0.7mm double amplitude) 80 min each in X, Y, and
Z directions |
||||
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/
backward) |
||||
| Materials | Case,Camera mount plate: Aluminum, Cable: FPVC | ||||
| Weight | Approx. 130g (including
the camera mount plate) |
Approx. 120g (including
the camera mount plate) |
|||
| Accessories | Instruction sheet, Lighting connection table, Camera Mount plate,
Mounting screws (M2 set screw x 4, M2 flat head screw x 4, M4 flat head screw x 4) |
||||
| Applicable standards | EN61326-1 *4, KC | ||||
| Model | FLV-TCC3HB | FLV-TCC1EP | |||
|---|---|---|---|---|---|
| Number of channels | 1 Spot Light,
2 standard lights |
1 Spot Light | |||
| Applicable light *1 | FLV series (excluding FLV-LN
series) |
FLV-EP series | |||
| Applicable camera *2 | FH-S series, FZ-S series | ||||
| Applicable vision system controller | FH series | ||||
| Input voltage | Supplied from applicable camera (12
V) or external power supply (24 V) *3 |
Supplied from applicable
camera (12 V) |
|||
| External power supply voltage | 24 VDC 10% (including ripple) | ⎯ | |||
| Current consumption | 1.5A max. | 1.0A max. | |||
| Recommended
power supply |
S8VS-06024 (manufactured by
OMRON, 24 VDC, 2.5 A, 60 W) |
⎯ | |||
| Power of
connected light |
12 VDC
for camera supply |
Continuous lighting | 0ch connection: 1,2ch
total 5.5 W max. 0ch non-connection: 1,2ch total 7.5 W max. |
All FLV-EP series
can be connected. |
|
| Trigger
lighting |
Simultaneous
lighting |
0ch connection:
1,2ch total 5.5 W max. 0ch non-connection: 1,2ch total 7.5 W max. |
|||
| Individual
lighting |
7.5 W max. for 1ch | ||||
| 24 VDC
for external supply |
Continuous lighting | 0ch connection:
1,2ch total 5.5 W max. 0ch non-connection: 1,2ch total 7.5 W max. |
⎯ | ||
| Trigger
lighting |
Simultaneous
lighting |
0ch connection:
1,2ch total 14 W max. 0ch non-connection: 1,2ch total 15 W max. |
|||
| Individual
lighting |
15 W max. for 1ch | ||||
| Drive method | 0ch Constant current method 1ch/
2ch: Constant voltage method |
Constant current method | |||
| Lighting method | Trigger lighting, Continuous lighting | ||||
| Luminance control method | 0ch Duty light adjustment or current
light adjustment 1ch/2ch Duty light adjustment or voltage light adjustment Duty light adjustment: PWM frequency of 100 kHz, light adjustment of 255 levels current light adjustment/ Voltage light adjustment: Light adjustment of 255 levels (all are configured with vision system controller) |
Duty light adjustment or
current light adjustment Duty light adjustment: PWM frequency of 100 kHz, light adjustment of 255 levels current light adjustment: Light adjustment of 255 levels (all are configured with vision system controller) |
|||
| Trigger lighting | Lighting in synchronization with trigger input timing from the
controller. |
||||
| Trigger lighting delay time | Ton: 30μs max. | ||||
| Lighting duration setting | Auto setting in accordance with shutter speed. | ||||
| External interface | Camera connection cable (directly connected with the main unit) | ||||
| Insulation resistance | 0.5 MΩ (100VDC) | ||||
| Ambient temperature | Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or
condensation) |
||||
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | ||||
| Degree of protection | IP20 (IEC60529) | ||||
| Vibration resistance (destructive) | 10 to 150 Hz, (0.7mm double amplitude) 80 min each in X, Y, and
Z directions |
||||
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions(up/down, left/right, forward/
backward) |
||||
| Materials | Case,Camera mount plate: Aluminum, Cable: FPVC | ||||
| Weight | Approx. 130g (including
the camera mount plate) |
Approx. 120g (including
the camera mount plate) |
|||
| Accessories | Instruction sheet, Lighting connection table, Camera Mount plate,
Mounting screws (M2 set screw x 4, M2 flat head screw x 4, M4 flat head screw x 4) |
||||
| Applicable standards | EN61326-1 *4, KC | ||||
*1. Check the lighting connection table of accessory.
*2. When mounting on the FH-S[]12, use the FH-SM12-XLC (sold separately).
*3. When supplying the power to this product from an external input power supply (24V), make sure to turn ON the power
to this product first or at the same time with the vision system controller. If you reverse this order, this product will
not recognize the 24V external input, so lighting greater than 7.5W will not be possible.
*4. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
*2. When mounting on the FH-S[]12, use the FH-SM12-XLC (sold separately).
*3. When supplying the power to this product from an external input power supply (24V), make sure to turn ON the power
to this product first or at the same time with the vision system controller. If you reverse this order, this product will
not recognize the 24V external input, so lighting greater than 7.5W will not be possible.
*4. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Analog Lighting Controller for FLV Series
FLV-ATC Series
Lighting Controller for Standard Light FLV-ATC21024/-ATC41024
| Model | FLV-ATC21024-[] *1 | FLV-ATC41024-[] *1 |
|---|---|---|
| Number of channels | 2 | 4 |
| Applicable light | FLV series (FLV-EP series and FLV-LN series are excluded.) | |
| Power supply voltage *2 | 100 to 240 VAC, 50/60 Hz | |
| Current consumption | 1 A max. | |
| Power of connected light | 2ch total 40 W max.
30 W max. for 1ch |
4ch total 40 W max.
30 W max. for 1ch |
| Drive method | Constant voltage method | |
| Lighting method | Trigger lighting, Continuous lighting | |
| Luminance control method | Voltage light adjustment: 14.0 to 24.0 V | |
| Trigger lighting | Lighting in synchronization with input from the trigger input terminal | |
| Trigger lighting delay time | T_on: 100 μs max. | |
| External interface | Trigger input terminal block | |
| Dielectric strength | 1500 VAC 50/60 Hz 1 min | |
| Insulation resistance | 20 MΩ (500 VDC) | |
| Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |
| Degree of protection | IP20 (IEC60529) | |
| Vibration resistance (destructive) | 10 to 150 Hz, (0.2 mm double amplitude) 80 min each in X, Y, and Z directions | |
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | |
| Materials | Case: Aluminum | |
| Weight | Approx. 800 g | |
| Accessories | Instruction sheet, AC input cable *1 | |
| Applicable standards | EN61326-1 *3 | |
*1. The suffixed symbol of the model name means the plug type of the accessory cable. A model name with no suffix
means type A.
*2. This product is the exclusive use for apparatus inclusion in the industrial machine field.
This product cannot be used for the connection to electric power equipment, such as a common residence, store,
and small establishment, because of nonconformity with to Electrical Appliance and Material Safety Law (PSE).
*3. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
means type A.
*2. This product is the exclusive use for apparatus inclusion in the industrial machine field.
This product cannot be used for the connection to electric power equipment, such as a common residence, store,
and small establishment, because of nonconformity with to Electrical Appliance and Material Safety Law (PSE).
*3. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Lighting Controller for Spot Light FLV-ATC10405/-ATC40405
| Model | FLV-ATC10405-[] *1 | FLV-ATC40405-[] *1 |
|---|---|---|
| Number of channels | 1 | 4 |
| Applicable light | FLV-EP series | |
| Power supply voltage *2 | 100 to 240 VAC, 50/60 Hz | |
| Current consumption | 0.6 A max. | |
| Power of connected light | 3 W max. | 4ch total 12 W max.
3 W max. for 1ch |
| Drive method | Constant current method | |
| Lighting method | Trigger lighting, Continuous lighting | |
| Luminance control method | Current light adjustment: 5 A max. | |
| Trigger lighting | Turning the light off in synchronization with input from the trigger input terminal | |
| Trigger lighting delay time | T_on: 1000 μs max. | |
| External interface | Trigger input terminal block | |
| Dielectric strength | 1500 VAC 50/60 Hz 1 min | |
| Insulation resistance | 20 MΩ (500 VDC) | |
| Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |
| Degree of protection | IP20 (IEC60529) | |
| Vibration resistance (destructive) | 10 to 150 Hz, (0.2 mm double amplitude) 80 min each in X, Y, and Z directions | |
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | |
| Materials | Case: Aluminum | |
| Weight | Approx. 800 g | |
| Accessories | Instruction sheet, AC input cable *1 | |
| Applicable standards | EN61326-1 *3 | |
*1. The suffixed symbol of the model name means the plug type of the accessory cable. A model name with no suffix
means type A.
*2. This product is the exclusive use for apparatus inclusion in the industrial machine field.
This product cannot be used for the connection to electric power equipment, such as a common residence, store,
and small establishment, because of nonconformity with to Electrical Appliance and Material Safety Law (PSE).
*3. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
means type A.
*2. This product is the exclusive use for apparatus inclusion in the industrial machine field.
This product cannot be used for the connection to electric power equipment, such as a common residence, store,
and small establishment, because of nonconformity with to Electrical Appliance and Material Safety Law (PSE).
*3. Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Lighting Controller for Line Light: FLV-ATC26024-100V/-200V
| Model | FLV-ATC26024-100V[] *1 | FLV-ATC26024-200V[] *1 |
|---|---|---|
| Number of channels | 2 | |
| Applicable light | FLV-LN series | |
| Power supply voltage *2 | 100 to 120 VAC, 50/60 Hz | 200 to 240 VAC, 50/60 Hz |
| Current consumption | 7 A max. | 4 A max. |
| Power of connected light | 2ch total 240 W max.
120 W max. for 1ch |
|
| Drive method | Constant voltage method | |
| Lighting method | Trigger lighting, Continuous lighting | |
| Intensity control method | Current light adjustment: 5 A max. | |
| Luminance control method | Turning the light off in synchronization with input from the trigger input terminal | |
| Trigger lighting delay time | T_on: 500 μs max. | |
| External interface | Trigger input terminal block | |
| Dielectric strength | 1500 VAC 50/60 Hz 1 min | |
| Insulation resistance | 20 MΩ (500 VDC) | |
| Ambient temperature | Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |
| Degree of protection | IP20 (IEC60529) | |
| Vibration resistance (destructive) | 10 to 150 Hz, (0.2 mm double amplitude) 80 min each in X, Y, and Z directions | |
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | |
| Materials | Case: Aluminum | |
| Weight | Approx. 2.1 kg | |
| Accessories | Instruction sheet, AC input cable *1 | |
| Applicable standards | EN61326-1 *3 | |
last update: January 27, 2025
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.