E5CD / E5CD-B

(1) Control Output Assignment
An auxiliary output is used as the cooling control output.
(2) Control
If PID control is used, you can set PID control separately for heating and cooling.
This allows you to handle control systems with different heating and cooling response characteristics.

(1) Control Output Assignment
An auxiliary output is used as the cooling control output.
(2) Control
If PID control is used, you can set PID control separately for heating and cooling.
This allows you to handle control systems with different heating and cooling response characteristics.

(Cannot be used on a Push-In Plus terminal block type)

Note:The E53-COV10 cannot be used. Refer to Data Sheet for the mounted dimensions.
*E53-COV23 are provided with the Digital Temperature Controller.

Note:This Waterproof Packing is provided with the Digital Temperature Controller.

*Lead wires are included with these CTs. If UL certification is required, use these CTs.

Note:Use this Adapter when the panel has already been prepared for an E5B[] Controller.

Note:This Mounting Adapter is provided with the Digital Temperature Controller.

(Cannot be used on a Push-In Plus terminal block type)

(Cannot be used on a Push-In Plus terminal block type)

Note:CX-Thermo version 4.66 or higher is required for the E5CD.
CX-Thermo version 4.67 or higher is required for the E5CD-B.
For the system requirements for the CX-Thermo, refer to information on the EST2-2C-MV4.