CJ-series EtherNet/IP Unit
            
        
last update: October 1, 2024
            • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.
• Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.
        
| Unit
 type  | 
Product
 name  | 
Specifications | Current
 consump- tion (A)  | 
Model | Stand-
 ards  | 
||||
|---|---|---|---|---|---|---|---|---|---|
| Communi-
 cations cable  | 
Communi-
 cations functions  | 
Units
 per CPU Unit  | 
No. of
 unit numbers allocated  | 
5 V
 sys- tem  | 
24 V
 sys- tem  | 
||||
| CJ1
 CPU Bus Unit  | 
EtherNet/IP
 Unit ![]()  | 
Shielded twisted-
 pair (STP) cable Categories: 100 Ω at 5, 5e  | 
Tag Data Link
 Functions, Message Communications Functions  | 
8 max.
 *1  | 
1 | 0.65 | --- | CJ1W-EIP21S | UC1,
 N, L, CE  | 
*1. Up to four EtherNet/IP Units can be connected to a NJ CPU Unit. Up to seven EtherNet/IP Units can be connected to a CJ2H-CPU6[]-EIP. Up to two EtherNet/IP Units can be connected to a CJ2M CPU Unit.
| Product
 name  | 
Appearance | Functions | No. of
 ports  | 
Accessories | Current
 consumption (A)  | 
Model | 
|---|---|---|---|---|---|---|
| Industrial
 Switching Hubs  | 
![]()  | 
Quality of Service (QoS):
 EtherNet/IP control data priority 10/100BASE-TX, Auto-Negotiation  | 
5 | Power supply
 connector  | 
0.07 | W4S1-05D | 
The following table shows the devices recommended for use with the EtherNet/IP.
| Part | Manufacturer | Model number | Inquires | 
|---|---|---|---|
| Switching Hub | Phoenix Contact | FL SWITCH SFN 8TX (8 ports) | Phoenix Contact USA Customer Service | 
| Contec USA, Inc. | SH8008(FIT)H (8 ports) | CONTEC USA Inc. | |
| Cisco Systems, Inc. | WS-C2955T-12 (12 ports) | Cisco Systems, Inc. Main Corporate HQ | |
| Twisted-pair
 cable  | 
100BASE-TX | ||
| EtherNet/IP compliant cable | - | ||
| Connectors
 (Modular plug)  | 
STP Plug | ||
| Panduit Corporation | MPS588 | Panduit Corporation US Headquarters | |
| Boots | Tsuko Company | MK boot (IV) LB | Tsuko Company Japan Headquarters | 
            Note: 1. Always use a switching hub when using tag data links in the network.
Note: 2. If a repeater hub is used for EtherNet/IP tag data links (cyclic communications), the network's communications load will increase, data collisions will occur frequently, and stable communications will be impossible.
        
last update: October 1, 2024