Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated)*1
last update: December 11, 2023
Type | Standard | L-shaped | T-shaped,
slot center 7 mm |
T-shaped,
slot center 10 mm |
|
---|---|---|---|---|---|
NPN
models |
Connector models | EE-SX670
EE-SX670A EE-SX470 |
EE-SX671
EE-SX671A EE-SX471 |
EE-SX672
EE-SX672A EE-SX472 |
EE-SX675 |
Pre-wired models | EE-SX670-WR | EE-SX671-WR | EE-SX672-WR | EE-SX675-WR | |
PNP
models |
Connector models | EE-SX670P
EE-SX670R |
EE-SX671P
EE-SX671R |
EE-SX672P
EE-SX672R |
EE-SX675P |
Pre-wired models | EE-SX670P-WR | EE-SX671P-WR | EE-SX672P-WR | EE-SX675P-WR | |
Sensing distance | 5 mm (slot width) | ||||
Sensing object | Opaque: 2 × 0.8 mm min. | ||||
Differential distance | 0.025 mm | ||||
Light source | Infrared LED with a peak wavelength of 940 nm | ||||
Indicator *1 | Light indicator (red) (turns ON when light is interrupted for models with A or R suffix) | ||||
Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | ||||
Current consumption | 12 mA max. | ||||
Control output | NPN open collector:
5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. OFF current (leakage current): 0.5 mA max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max. OFF current (leakage current): 0.5 mA max. |
||||
Protection circuits | Load short circuit protection | ||||
Response frequency *2 | 1 kHz min. (3 kHz average) | ||||
Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver. | ||||
Ambient temperature range | Operating: - 25 to +55 °C, Storage: - 30 to +80 °C (with no icing or condensation) | ||||
Ambient humidity range | Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation) | ||||
Vibration resistance | Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions |
||||
Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | ||||
Degree of protection | IEC60529 IP50 | ||||
Connecting method | Connector Models (direct soldering possible), Pre-wired Models (Standard cable length:
1 m), Models with Connectors (Standard cable length: 0.1 m) |
||||
Weight | Connector models | Approx. 3.1 g | Approx. 3 g | Approx. 2.4 g | Approx. 2.7 g |
Pre-wired models | Approx. 18.9 g | Approx. 17.3 g | Approx. 17.8 g | Approx. 18.3 g | |
Material | Case | Polybutylene phthalate (PBT) | |||
Cover | Polycarbonate | ||||
Emitter/receiver |
Type | Close-mounting | F-shaped | R-shaped | ||
---|---|---|---|---|---|
NPN
models |
Connector models | EE-SX673
EE-SX673A EE-SX473 |
EE-SX674
EE-SX674A EE-SX474 |
EE-SX676 | EE-SX677 |
Pre-wired models | EE-SX673-WR | EE-SX674-WR | EE-SX676-WR | EE-SX677-WR | |
PNP
models |
Connector models | EE-SX673P
EE-SX673R |
EE-SX674P
EE-SX674R |
EE-SX676P | EE-SX677P |
Pre-wired models | EE-SX673P-WR | EE-SX674P-WR | EE-SX676P-WR | EE-SX677P-WR | |
Sensing distance | 5 mm (slot width) | ||||
Sensing object | Opaque: 2 × 0.8 mm min. | ||||
Differential distance | 0.025 mm | ||||
Light source | Infrared LED with a peak wavelength of 940 nm | ||||
Indicator *1 | Light indicator (red) (turns ON when light is interrupted for models with A or R suffix) | ||||
Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 10% max. | ||||
Current consumption | 12 mA max. | ||||
Control output | NPN open collector:
5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. OFF current (leakage current): 0.5 mA max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max. OFF current (leakage current): 0.5 mA max. |
||||
Protection circuits | Load short circuit protection | ||||
Response frequency *2 | 1 kHz min. (3 kHz average) | ||||
Ambient illumination | 1,000 lx max. with fluorescent light on the surface of the receiver. | ||||
Ambient temperature range | Operating: -25 to +55°C, Storage: -30 to +80°C (with no icing or condensation) | ||||
Ambient humidity range | Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation) | ||||
Vibration resistance | Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions |
||||
Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | ||||
Degree of protection | IEC60529 IP50 | ||||
Connecting method | Connector Models (direct soldering possible), Pre-wired Models (Standard cable length:
1 m), Models with Connectors (Standard cable length: 0.1 m) |
||||
Weight | Connector models | Approx. 2.3 g | Approx. 3 g | Approx. 2.2 g | Approx. 2.2 g |
Pre-wired models | Approx. 16.8 g | Approx. 17.1 g | Approx. 16.9 g | Approx. 16.9 g | |
Material | Case | Polybutylene phthalate (PBT) | |||
Cover | Polycarbonate | ||||
Emitter/receiver |
*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk shown at the right.
last update: December 11, 2023