Industrial Network Selection Guide
|
Network Type Item |
Information System Network |
Control System Network |
Field Network |
Motion Field Network |
||||
|
Ethernet |
Controller Link | SYSMAC Link | CompoBus/S | CompoNet |
MECHA-TROLINK-II |
|||
|
Communi-cation Type
|
Message Commu-nication |
O |
O |
O |
O |
--- |
O |
O |
|
Data Link |
--- |
O |
O |
--- |
--- |
--- |
--- |
|
|
Remote I/O |
--- |
--- |
--- |
O |
O |
O |
--- |
|
|
Baud Rate (Maximum Communication Speed) |
100 Mbps |
2Mbps Communication Cycle: Approx. 34ms; (Wire: 32, 2kBit + 2kWord Data Link) |
2Mbps Communication Cycle: Approx. 34ms; (Wire: 32, 2kBit + 2kWord Data Link) |
500kbps (Communication Cycle: Approx. 5ms; (Input: 128 Point; Output: 128 Point) |
750kbps (Communication Cycle: 1ms and below; (Input: 128 Point; Output: 128 Point) |
4 Mbps at 30 m |
10Mbps |
|
|
Communication Distance |
2.5 km |
Twisted Pair: 3km; H-PCF Optical Cable: 20km; GI Optical Cable: 30km |
Coaxial Cable: 1km; Optical Fiber Cable: 10km |
500m |
Trunk length: 500m; Communication Cycle: 6ms and below |
1.5 km with max. 2 repeaters |
Maximum 50m |
|
|
Maximum Number of Nodes |
254 |
62 |
62 |
63 |
32 |
384 nodes (word type=128 nodes; bit type=256 nodes) |
30 |
|
|
Communication Medium |
Coaxial Cable (10BASE-5) or Twisted Pair (100BASE-TX/ 10BASE-T) |
Twisted Pair or Optical Fiber Cable |
Coaxial Cable
Optical Fiber Cable |
DeviceNet Cable |
2 Core VCTF Cables, 4 Core VCTF Cables, Flat Cable |
Special 4 pair flat cable, round cable (VCTF, Belden) |
METCHATROLINK-II Cable |
|
|
Data Link Capacity (Per Network) |
--- |
32000CH |
2966CH |
--- |
--- |
--- |
--- |
|
|
Maximum I/O Point |
--- |
--- |
--- |
32000 Points (When Using Configurator); 15000 Points (When Not Using Configurator) |
256 Points |
2560 Points |
--- |
|
|
PLC Type |
C200HX/HG/HE |
C200HX/HG/HE; C200HS; C1000H/C2000H |
CJ Series;C200HX/HG/HE |
|||||
 |
* Click on the field network name to view details.
Ethernet Connection
Enables direct connection to personal
computers or information networks with open protocol: Ethernet/IP or
FINS protocol.
Controller Link (Fiber
Optic)
High-speed Optical LAN with a
transmission rate of 2 Mbps allows easy data exchange among PLC and a
wide range of FA across 30 km.
Ethernet/IP
With Ethernet as the backbone
architecture, optical switches can be used to extend network of 100
Mbps with easy data sharing among PLCs.
Controller Link (Wired)
Allows high-speed, large capacity data
link with cost-saving wiring, data can be shared among 62 nodes in
total.
PC Link (1:1, 1:N)
Easy and low-cost communication between
PLCs of limited data capacity.
DeviceNet
Open network, which connects a variety
of components such as drivers, temperature controller and etc. with
Smart Features built with totalization and signal indication for
maintenance.
CompoNet
Next generation network is ideal for high-speed ON/OFF bus for machinery system. With communication cycle time less than 1 ms connecting up to 1.5 km.
Selection Guide
Top-
OMRON Asia Pacific
-
OMRON Corporation
-
Copyright Statement
-
Sitemap
-
Terms and Conditions
-
Privacy Policy
-
Warranty and Limitation
© Copyright OMRON Corporation 2000. All Rights Reserved.