Model |
Appearance |
Features |
Approved Standard No. |
Agency |
Relays with Forcibly Guided Contacts |
|
• Relays with forcibly guided contacts. (EN50205 Class A, certified by VDE) • Slim, compact design. • 4- and 6-pole models available. • The Relay's terminal arrangement simplifies PWB pattern design. • Reinforced insulation between inputs and outputs. Reinforced insulation some poles of different polarity. |
EN61810-1 |
• VDE |
Relays with Forcibly Guided Contacts |
|
• Switches up to 10 A. • Forcibly guided contacts ensure safety. (EN50205 Class A, certified by VDE) • Suitable for obtaining machine CE marking. • Most suitable for safety circuits in production machinery. • Track- and back-mounting Sockets are available. |
EN61810-1 EN50205 |
• VDE |
Power Relays |
|
• Switching possible with 40-A current. • The maximum load capacity of 160 A when using 4-pole parallel connections.
• Mirror contact construction ensure safety. (Mirror contact
construction in the Relay and auxiliary contact • A design with a small number of openings makes it difficult for dust or foreign matter to enter. • Ideal for supply power to industrial inverters, servo drivers, and other devices, and switching power to motors and other equipment. |
EN60947-4-1 |
• TÜV Rheinland • UL (cUL) |
Note:
1. The safety category refers to the highest applicable category that can be selected when a safety block is created for a control system. It is not the safety category applicable to the safety component itself.
2. The G7SA, G7SB, and G7S-[]-E have VDE certification and conform to the EC Low Voltage Directive. They do not, however, have the CE Marking authorized in accordance with European guidelines.
3. Production of the P7S-A10 and P7S-14A have
been discontinued at the end of March 2007. The recommended substitute will
be the P7S-14F-END.
Refer to Precautions for All Relays with Forcibly Guided Contacts for detail.
When the equipment or machine in which the product is used is to acquire the
CE Marking, the manufacturer's declaration of
conformity for the G7SA, G7SB, and G7S-[]-E can be used to prove VDE
compliance.