Safety Light Curtain/Safety Sensor Selection Guide

Model

Appearance

Features

Approved Standard No.

Agency

F3SR-B

Safety Light Curtain

• Easy, intuitive operation: Three indicators and easy-to-adjust mounting bracket.

• Long-distance operation at 20 m for convenient application. Can be used for large-scale applications.

• Safe operation to ISO 13849-1 Ple. Certified for the main safety standards. Safety features provided for global application.

EN61496-1
ESPE TYPE 4
IEC61496-1
ESPE TYPE 4
IEC61496-2
AOPD TYPE 4
ISO13849-1

• TÜV SÜD

• UL (cUL)

• KOSHA

F3SJ

Safety Light Curtain (EASY type)

• Places emphasis on the basic function of Safety Light Curtains: Detecting hazards and outputting a safety signal.

• Installation with half the work (in-house comparison).

• Global support. Greatly increased noise resistance.

IEC/EN61496-1
UL61496-1, ESPE TYPE4
IEC61496-2
CLC/TS61496-2
UL61496-2, AOPD TYPE4
IEC/EN01508, UL508
CAN/CSA C22.2 No.14
CAN/CSA C22.2 No.8

• TÜV SÜD

• UL(cUL)

F3SJ

Safety Light Curtain (BASIC type)

• Connect three Curtains in series. Enables application in recesses and corners.

• Muting function to temporarily disable the curtain to allow workpieces to pass. Error confirmation at a glance.

• Global support. Greatly increased noise resistance.

IEC/EN61496-1

UL61496-1, ESPE TYPE4
IEC61496-2
CLC/TS61496-2
UL61496-2, AOPD TYPE4
IEC/EN01508, UL508
CAN/CSA C22.2 No.14
CAN/CSA C22.2 No.8

• TÜV SÜD

• UL(cUL)

F3SJ

Safety Light Curtain (ADVANCED type)

• Muting and blanking functions respond to a variety of safety needs.

• Can be front-mounted, top-mounted or back-mounted in series.

• Finger, hand, hand/arm, leg/body protection and presence detection.

• Sensing width of 245 to 2,500 mm.

• Standard mounting brackets.

EN61496-1
ESPE TYPE 4
IEC61496-1
ESPE TYPE 4
IEC61496-2
AOPD TYPE 4

• TÜV SÜD

• UL(cUL)

• KOSHA *

MS4800

Safety Light Curtain

• Durable housing with a thickness of 3 mm min. withstands vibration and impacts.

• Long sensing distance of 20 m.

• Intuitive operation with the programming and diagnostics module (PDM) and easy-to-understand individual beam indicators (IBI).

• Four blanking functions for disabling beams.

EN61496-1
ESPE TYPE 4
IEC61496-1
ESPE TYPE 4
IEC61496-2
AOPD TYPE 4

• TÜV Rheinland

• UL (cUL)

E3ZS

Single-beam Safety Sensor

• Conforms to EN and IEC standards.

• Sensing distance of 3 m.

• Used with G9SP Safety Controllers.

• Designed for hazardous machine gaps.

EN61496-1
ESPE TYPE 2
IEC61496-1
ESPE TYPE 2
IEC61496-2
AOPD TYPE 2

• TUV SÜD

• UL (cUL)

E3FS

Single-beam Safety Sensor

• Conforms to EN and IEC standards.

• Sensing distance of 10 m.

• Used with G9SP Safety Controllers.

• Designed for hazardous machine gaps.

EN61496-1
ESPE TYPE 2
IEC61496-1
ESPE TYPE 2
IEC61496-2
AOPD TYPE 2

• TUV SÜD

 Wire-saving Devices for F3SJ Safety Light Curtain

F39-TC5[]

Connector Terminal Box
(for Muting Terminal/F3SJ-A)

• Reduces wiring between Safety Light Curtains and Muting Sensors.

• Provides IP67 protection against water and dust.

• Connection using connectors significantly reduces wiring work.

• Easily visible LED indicators.

• On-site adjustment with support software.

---

---

F3SP-T01

Safety Terminal Relays
(for F3SJ-A)

• Simplifies wiring from Safety Light Curtains to the Safety Relay outputs.

• Simplifies wiring inside the panel and helps prevent incorrect wiring.

• Easy replacement of relays.

• Screw-less clamp terminals.

• On-site adjustment with support software.

---

---