Basic Door Switch Selection Guide

Basic Switch Selection Table

Limit Switch Selection Table

General-purpose Basic Switch

Miniature Basic Switch

Subminiature Basic Switch

Ultra Subminiature Basic Switch

Sealed Basic Switch

Detection Switch

Door Switch

 Item                        Model

Appearance

Features

Choose from plunger or lever actuator.

Low operation force of 2 N max.

Quick-connection terminals for easier wiring.

Minimum contact gap of 3 mm (standard model).

Pull-on lock model also available.

Incorporates two circuits for power loads and signals.

Install using panel or screw mounting.

Contact

Contact specification

Crossbar

Rivet

Rivet

Contact material

Gold alloy

Silver

Silver

Rating (resistive load)

1A at 125 VAC

16A at 250 VAC

5A at 250 VAC

0.1A at 30 VDC

Inrush current

Standard model: 30 A max.

Pull-on lock model: 24 A max.

Between terminal 1 and 2:

60A max.

Minimum applicable load

1 mA at 5 VDC

160 mA at 5 VDC

160 mA at 5 VDC

1 mA at 5 VDC

Operating force (OF)

2.0 N {204 gf}

19.61, 2.94, 1.96N

{2000, 300, 200 gf}

3.24 N

{330 gf}

Durability

Mechanical

300× 10³ min.

10 × 10⁶ min.

100 × 10³ min.

Electrical

100× 10³ min.

100× 10³ min.

100× 10³ min.

Ambient operating temperature

-30°C to 60°C

-25°C to 85°C

-25°C to 85°C

Mounting pitch

---

22 mm

26.4 mm

Actuators

• Plunger

• Lever

• Pin plunger

• Pin plunger

• Hinge lever

Terminals

HL connector (J.S.T)

Quick-connect (#250)

Solder (straight, right angled)