XW6T

Natural disasters caused by global warming and climate change are became global social issue,
that drives over 150 countries and regions worldwide to take action toward decarbonization.
Our goal is to reduce greenhouse gas (GHG) emissions toward half by through new ways of building
control panels, that key figure of the manufacturing site.

Value Design for Panel (Value Design) is the common concept shared
across OMRON's in-panel product specifications to deliver new value to
your control panels.
This Value Design also integrate environment consideration concept
that enable earth and user-friendly control panel building.

A green indicator comes out when a cable is insert deeply into the terminal hole giving immediate confirmation of the proper wiring insertion.
Enabling secure wiring.

Colored Short Bars are built in. You can easily know the common area thanks to the visible Short Bars placed at the front face of the Terminal Blocks.

You can immediately judge the wiring state thanks to the visible indicators avoiding errors, such as non-wiring and incomplete wiring.

Simply check the indicators for wiring maintenance.
No retightening is required, the terminals are firmly hold in place thanks to Push-In Plus technology.

Example of 40 pins

Necessary Items for a Wiring System Interface Are Contained in a Set.

Now you can use Push-In Plus technology to reduce wiring time and work: Just insert wires, no tools required.

OMRON’s Push-In Plus technology are as easy as inserting to an earphone jack. They help reduce the work load and improve wiring quality.

Even though less insertion force is required, the wires are held firmly in place. The advanced mechanism and the manufacturing technology produce a spring that ensures better workability and reliability. The same strength as screw terminal blocks is provided.

*Information for Push-In Plus and screw terminal blocks is based on OMRON's actual measurement value data.

If you use Push-In Plus technology you don't need to tighten screws, necessary for screw TB.

You can insert wires with ferrules or you can also insert solid wires or stranded wires.

Thanks to the holding mechanism of the screw you can easily wire stranded cables using both hands.